Calibration Equipment

 
     
    1 - 24 of 36 items
    Sort By:
    24V Supply For Loop Transmitters Altek 334A mA Loop Calibrator, 4-20 mA Ashcroft Digital Pressure Gauge
    24V Supply For Loop TransmittersAltek 334A mA Loop Calibrator, 4-20 mAAshcroft Digital Pressure Gauge
    The Field Tools 24V Supply provides portable power to loop-powered transmitters. It’s a fully contained power source that takes the low voltage from three “AAA” alkaline batteries and increases it to a highly filtered 24 volt...

    Altek Model # 334A Sources Milliamps Simulates two-wire transmitters Read milliamp outputs Power & Measure two-wire transmitters Read DC Volts to check loop power supplies Accuracy to ±0.03% Long lasting alkaline batteries (Three "9V"...

    ±0.5% full-scale accuracy

    IP67 rated case

    Easy-to-read, 5-digit display with 20-segment bar graph

    Stainless steel sensor and nine engineering units make this gauge suitable for many applications

    $138.00

    $1,263.85

    $340.40

    Emerson 475 Field Communicator Fluke DSX-5000 CableAnalyzer GCH-140 Cylinder Heater Controller 12VDC
    Emerson 475 Field CommunicatorFluke DSX-5000 CableAnalyzerGCH-140 Cylinder Heater Controller 12VDC

    Product Highlights New silver edition celebrates 25 years of handheld technology leadership Full-color graphical user interface Powerful field diagnostics Bluetooth® communication Long-lasting Lithium-Ion power module Universal support for...

    The DSX CableAnalyzer copper test solution enables testing and certification of twisted pair cabling for up to 10 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A or Class FA. Certifying a cable is one...The GCH-140 Gas Cylinder Heater Controller is used with the GCH series sample cylinder heaters. The controller monitors the heater’s temperature sensors to determine the cylinders temperature and regulate the heaters to maintain the...

    $5,589.00

    $12,592.00

    $115.00

    GCH-300 Sample Cylinder Heater GCH-500 Sample Cylinder Heater GCH-LP-120 Sample Cylinder Heater Lab Supply
    GCH-300 Sample Cylinder Heater GCH-500 Sample Cylinder Heater GCH-LP-120 Sample Cylinder Heater Lab Supply
    Designed to preheat a standard 2” OD 300cc gas sample cylinder Works with either stainless steel or aluminum cylinders Quickly preheats cylinder to 140°F, Cold to Hot in about 10 minutes Low power (50 watts @ 12V DC) Rugged...Designed to preheat a standard 2” OD 500cc gas sample cylinder Works with either stainless steel or aluminum cylinders Quickly preheats cylinder to 140°F, Cold to Hot in about 10 minutes Low power (100 watts @ 12V DC) Rugged...Designed to preheat a standard 2” OD 500cc gas sample cylinder Works with either stainless steel or aluminum cylinders Quickly preheats cylinder to 140°F, Cold to Hot in about 10 minutes Low power (100 watts @ 12V DC) Rugged...

    $339.25

    $477.25

    $408.25

    InLink Evaluation Board InLink-CC OEM HART Protocol Modem Module
    InLink Evaluation BoardInLink-CC OEM HART Protocol Modem ModuleInLink-TC OEM HART Protocol Modem Module
    The InLink-TC evaluation board provides product developers the ability to quickly evaluate the InLink-TC modem.  It provides a simple RS-232 to HART interface compatible with most off-the-shelf HART protocol software.
    InLink-CC is a HART protocol modem that modulates logic level 1200 BAUD serial data to a HART loop, and demodulates received HART data providing a 1200 BAUD serial bit stream. It allows designers to easily implement a HART compliant modem without...InLink-TC is a HART protocol modem that modulates logic level 1200 BAUD serial data to a HART loop, and demodulates received HART data providing a 1200 BAUD serial bit stream. InLink-TC interfaces to standard 3.3V to 5V logic and includes loop...

    $36.80

    $89.70

    $109.25

    MicroFlex Generic HART DTM MicroLink HART Protocol Modem w/ USB Interface (DIN Rail Mount) MicroLink HART Protocol Modem with RS-232 Interface
    MicroFlex Generic HART DTMMicroLink HART Protocol Modem w/ USB Interface (DIN Rail Mount)MicroLink HART Protocol Modem with RS-232 Interface
    For a simple software solution that works with any HART field device, consider the Microflex Generic HART DTM-5. This low cost solution installs into the PACTware FDT frame to provide HART common practice and universal commands. Not all functions...DIN rail mounted version of the 101-0027 MicroLink USB HART protocol modem. Compatible with all certified HART devices and all leading HART configuration and monitoring software. Includes USB drivers, PACTware, and the Generic DTM-4 software on a...Provides a simple low-cost interface between Highway Addressable Remote Transducer (HART) protocol devices and any computer with an RS-232 serial port. MicroLink was designed to comply with the HART physical layer to ensure device compatibility....

    $224.25

    $281.75

    $224.25

    MicroLink HART Protocol Modem with USB Interface MicroPulser 1000 CW/CCW Outputs MicroPulser 1000M Matched Outputs
    MicroLink HART Protocol Modem with USB Interface MicroPulser 1000 CW/CCW Outputs MicroPulser 1000M Matched Outputs
    The USB MicroLink HART protocol modem provides the hardware interface between Highway Addressable Remote Transducer (HART) protocol devices and a Windows PC. Universal Serial Bus (USB) drivers make MicroLink compatible with most software...The MicroPulser 1000 provides a pulse output for forward flow (rotation in one direction) as well as reverse flow (rotation in the opposite direction). Only MicroPulser offers this feature. Determining index rotation direction allows blocking...The MicroPulser 1000M provides pulses on both output channels for clockwise or counter-clockwise rotation. True absolute rate filtering provides a +/-36 degrees of rotation de-bounce window. When flow is reversed, allow 36 degrees of rotation...

    $281.75

    $517.50

    $517.50

    Molbox and Molbloc-L Gas Flow Calibration Kit, 50 slm Dual Oscilloscope, Handheld, 200 MHz, 6 InchColor Display Process Calibrator TechChek 820
    Molbox and Molbloc-L Gas Flow Calibration Kit, 50 slm DualOscilloscope, Handheld, 200 MHz, 6 InchColor DisplayProcess Calibrator TechChek 820
    Product Highlights Compact presentation Ranges Available to Provide 0.5% Reading Uncertainty from 10 sccm to 50 slm Delivered Standard with Calibrations for Air and Nitrogen Internal Valving for On-Board Purge, Leak Test and Tare Support Includes...Portable Performance for Challenging Environments With four isolated channels and up to 7 hours of battery life, the lightweight THS3000 Handheld Oscilloscope Series enables you to safely make floating or differential measurements on your bench...ALTEK MODEL# 820 Functions Like a Calibrator: Milliamps, Voltage, RTD, T/C & Frequency Measures Like a Multimeter: AC/DC Volts, Ohms & Continuity Digital Accuracy with Analog Simplicity — Speed sensitive digital pot for fast...

    $46,756.70

    $5,577.00

    $2,999.99

    Pulse Scope RS-232 Extension Cable (6 ft) RS-485 to RS-232 Converter
    Pulse Scope RS-232 Extension Cable (6 ft)RS-485 to RS-232 Converter
    Pulse Scope is a USB oscilloscope designed to aid field service technicians and engineers with troubleshooting pulse or frequency related equipment. Use Pulse Scope to test PLC digital inputs and outputs, flow meters with pulsed outputs, speed...

    RS-232 DB9 male to DB9 female extension cable, 6 feet long. Can be used with RS-232 modems and converters to increase the cable length.

    • Auto transmit control eliminates RTS requirement • Power Up/Down glitch-free permits live insertion or removal • Powered from RS-232 port • Common mode range permits +/-7V ground difference • Not bus terminated -...

    $78.00

    $12.00

    $87.00